PROFILES & OVERVIEW
PC Sheet and Welded Mesh Machine Safety Fence
The PC Sheet and Welded Mesh Machine Safety Fence is a fixed barrier panel for machine guarding enclosures and industrial separation layouts. Its framed construction combines a PC sheet in the upper section with welded mesh infill in the lower section.
This divided panel arrangement provides two distinct barrier surfaces within one module. The upper portion is formed by a continuous sheet fixed around its edges, while the lower portion uses an open welded wire grid. Both sections are held within a rectangular perimeter frame installed between square support posts.
Combined Panel Construction
The product photographs show the upper PC sheet secured with visible fasteners and the lower mesh integrated into the frame below it. A horizontal division separates the two infill sections and creates a clear transition within the panel.
Post and Connection Arrangement
Square posts support both sides of the panel. Metal wraparound brackets connect the panel frame to the posts at upper and lower positions, while covered floor-mount bases provide defined fixing locations at the bottom of each post.
Machine Guarding and Workshop Separation
The panel can be used around machinery, production cells, maintenance zones and other controlled areas. Multiple compatible sections can form longer fixed runs, with access gates added separately where personnel entry is required.
- Combined infill layout: One framed panel incorporates an upper PC sheet section and lower welded mesh section.
- Upper sheet panel: The sheet is fixed to the surrounding frame with visible fasteners around its edges.
- Lower welded mesh: The open wire grid forms the lower portion of the barrier panel.
- Rectangular perimeter frame: The two infill sections are contained within a single structured panel module.
- Square support posts: Upright posts provide defined fixing points at both sides of the panel.
- Wraparound connection brackets: Metal brackets connect the panel frame to the adjacent posts at upper and lower positions.
- Covered floor-mount bases: Base covers provide a finished interface around the lower post mounting area.
Application & Projects
Application & Projects
This combined PC sheet and welded mesh fence panel is designed for fixed guarding lines around production machinery, automated work cells, maintenance areas and controlled workshop zones. The upper sheet section creates a continuous panel surface, while the lower mesh section retains an open grid at floor level.
The framed panel can be repeated between compatible posts to form straight barrier runs or incorporated into modular machine guarding layouts. It is suitable where the project requires two different infill formats within one fixed fence panel.
Installation
Installation
- Confirm the barrier line and panel positions according to the machine guarding layout.
- Mark the post locations and verify that the mounting surface is stable and level.
- Position the square posts upright and align the covered floor-mount bases.
- Secure the posts using anchors selected for the site floor and installation conditions.
- Set the framed combined panel between the posts and align the upper and lower connection points.
- Fit and tighten the wraparound post brackets and panel fasteners evenly.
- Check the PC sheet fasteners, mesh frame, post alignment and all connections before placing the guarded area into service.
Final anchoring and site safety checks should be completed by qualified installation personnel according to the guarding layout and local requirements.
